AED
AFN
ALL
AMD
ANG
AOA
ARS
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GBP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
AN6675K Turntable drive IC for SL1200 turntables
TT106
AN6675K Turntable drive IC for SL1200 turntables
NEW AN6675K Turntable driver IC
To suit Technics SL1200 series turntables and others
Identified at part IC101 in Technics SL1200 service manual
Safe and prompt delivery available anywhere in the world
NOTE: The original AN6675 chip was physically bigger than this replacement chip. That original IC is no longer manufactured, and as such one is left with little option but to use this smaller chip if a replacement is required. Both ICs have the same technical specifications and are identical in their characteristics and purpose. It is just that the newer chip is physically smaller.
There are two types of SL1200 main printed circuit boards in widespread use. The older boards had larger hole dimensions to accommodate the physically larger AN6675 Intergrated circuit. The length and width across the pins of the new chip will not directly fit into the existing holes in the older type of main board.
The newer IC package, ie the only type that is presently manufactured, and that is is available here, have pin dimensions that measure approximately 19.5mm x 14mm.
The earlier style IC package measured approximately 28mm x 18mm.
If your PCB has mounting holes that measure approximately 28mm x 18 mm, THE NEWER AN667 WILL NOT DIRECTLY FIT INTO THESE HOLES.
An adaptor PCB will be required, with the new chip being soldered into this PCB, and the pins from this adaptor PCB fitting into the existing holes on the original main board.
We stock the adaptor PCB board which is sold seperately.
( Do not even consider making new holes in the PCB to accommodate this smaller chip - the track layout on the PCB does not allow this and you run the very real risk of destroying the board)
Additionally, the use of this smaller chip will require that at least one of the screw holes in the aluminium heatsink will have to be re-drilled and either have the new hole tapped, or alternatively use a through bolt to securely attach the heatsink to the smaller IC in two places.
Heatsink compound will have to be re-applied before securing the heatsink.
We sell convenient sized tubes of heatsink compound in an easy to use applicator.
To suit Technics SL1200 series turntables and others
Identified at part IC101 in Technics SL1200 service manual
Safe and prompt delivery available anywhere in the world
NOTE: The original AN6675 chip was physically bigger than this replacement chip. That original IC is no longer manufactured, and as such one is left with little option but to use this smaller chip if a replacement is required. Both ICs have the same technical specifications and are identical in their characteristics and purpose. It is just that the newer chip is physically smaller.
There are two types of SL1200 main printed circuit boards in widespread use. The older boards had larger hole dimensions to accommodate the physically larger AN6675 Intergrated circuit. The length and width across the pins of the new chip will not directly fit into the existing holes in the older type of main board.
The newer IC package, ie the only type that is presently manufactured, and that is is available here, have pin dimensions that measure approximately 19.5mm x 14mm.
The earlier style IC package measured approximately 28mm x 18mm.
If your PCB has mounting holes that measure approximately 28mm x 18 mm, THE NEWER AN667 WILL NOT DIRECTLY FIT INTO THESE HOLES.
An adaptor PCB will be required, with the new chip being soldered into this PCB, and the pins from this adaptor PCB fitting into the existing holes on the original main board.
We stock the adaptor PCB board which is sold seperately.
( Do not even consider making new holes in the PCB to accommodate this smaller chip - the track layout on the PCB does not allow this and you run the very real risk of destroying the board)
Additionally, the use of this smaller chip will require that at least one of the screw holes in the aluminium heatsink will have to be re-drilled and either have the new hole tapped, or alternatively use a through bolt to securely attach the heatsink to the smaller IC in two places.
Heatsink compound will have to be re-applied before securing the heatsink.
We sell convenient sized tubes of heatsink compound in an easy to use applicator.
Brand:
Unknown
weight:
100.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
No Reviews Posted Yet - be the first! (write review)