Gain 

Unity,: (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking

Bandwidth 

300 MHz (-3dB)

Video input

Number/signal type 

1 analogue RGBHV, RGBS, RGsB, RsGsBs

Connectors 

RGB 130xi, RGB 134xi: 1 9-pin D male

RGB 160xi: 1 15-pin HD female

Minimum/maximum levels 

Analogue: 0.3V to 1.5V p-p with no offset at unity gain

Impedance 

RGB 130xi, RGB 134xi: 75 ohms or Hi Z, switchable

(set to 75 ohms if no local monitor is connected)

RGB 160xi 

75 ohms

Horizontal frequency 

Autoscan 15 kHz to 130 kHz

Vertical frequency 

Autoscan 30 Hz to 120 Hz

Return loss 

-30dB @ 5 MHz

Maximum DC offset 

4.0V

Video output

Number/signal type 

RGB 130xi, RGB 160xi: 1 analog RGBHV, RGBS, RGsB

RGB 134xi: 2 analog RGBHV, RGBS, RGsB

Connectors 

RGB 130xi, RGB 160xi: 6 BNC female

RGB 134xi: 2 x 6 BNC female

RGB 160xi: 1 15-pin HD female local monitor buffered output

Minimum/maximum levels 

Analogue: 0.7V to 0.75V p-p with 0.70V p-p input

Impedance 

75 ohms

Return loss 

-30dB @ 5 MHz

Sync

Input type 

RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V (-), RsGsBs 1.3V (-)

Output type 

RGBHV (±), RGBS(±), RGsB (-)

Input level 

2V to 5.5V p-p with ±0.2VDC offset (max.)

Output level 

4V to 5V p-p

Input impedance 

10 kohms

Output impedance 

75 ohms

Max. propagation delay 

48 nS

Max. rise/fall time 

3.5 nS

Polarity 

RGBHV: when RGBHV is input, polarity follows input;

otherwise negative

RGBS, RGsB 

negative

Audio

Gain 

Unbalanced 0dB,: balanced +6dB

Frequency response 

20 Hz to 20 kHz, ±0.05dB

THD + Noise 

0.03% @ 1 kHz,: 0.3% @ 20 kHz at rated maximum output drive

S/N 

>90dB, at the rated maximum output (14dBu), balanced

Stereo channel separation 

>95dB @ 1 kHz to 20 kHz

Audio input

Number/signal type 

1 PC level stereo, unbalanced

Connectors 

1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)

Impedance 

>10 kohms, DC coupled

Maximum level 

+8.5dBu,: (unbalanced) at stated %THD+N

Audio output

Number/signal type 

1 stereo (2 channel), balanced/unbalanced

Connectors 

1: 3.5 mm captive screw connector, 5 pole

Impedance 

50 ohms unbalanced,: 100 ohms balanced

Gain error 

±0.1dB channel to channel

Maximum level (600 ohm) 

>+14dBm, balanced at stated %THD+N

General

Power 

100VAC to 240VAC, 50/60 Hz, 15 watts, internal, auto-switchable

MBC power jack 

9.0VDC, 150 mA